Model TW010G is a cordless 25.4mm (1″”) square drive D-handle impact wrench powered by a 40Vmax XGT Li-Ion battery
• This model provides an excellent combination of high torque and maneuverability, aiming to replace air impact wrenches for tightening large diameter bolts.
• This model is equipped with a long anvil.
High-torque and Excellent maneuverability
• Square drive: 25.4mm (1″”)
• The hammer is designed to be larger in the radial direction to efficiently increase the moment of inertia of the hammer, providing an excellent combination of high torque and maneuverability while suppressing increase in hammer size.
• By designing the motor to be positioned vertically, we have achieved a reduction in the overall length of the tool and a suppression of the reaction force on the hand at startup.
Trigger switch with full speed mode (Variable speed / Full speed)
• Full speed is reached with less trigger pull, reducing fatigue in continuous operation.
• Variable speed mode or Full speed mode can be selected depending on applications.
Ring illumination LED
• The use of a ring illumination LED reduces the shadow of the socket on a workpiece, providing a better view of the workpiece.
• With preglow/afterglow functions and light mode
Toolless installation of Side handle
Side handle can be installed 360° without a tool, and the angle of the holding section can be adjusted back and forth, making it suitable for a variety of operations.
Auto-stop system available in both forward/reverse rotation modes
3 modes of reaction time for automatic stop available both in forward and reverse rotation modes
Rubber joint
The housing section for battery installation, which is independent of the main body of the tool, has a rubberized anti-vibration structure that suppresses chattering of the terminals and wear of the battery rails.
Tool hanger (Ring) allows to hang the tool on pipes, hooks, etc.
Two-finger trigger shaped for easy pulling even with a gloved hand
Equipped with a BL motor
Variable speed control by trigger
Compatible with XPT (eXtreme Protection Technology)
Electronic 4 stage impact power selection for added versatility
Optional sockets for added versatility
Spesifikasi
Anvil typeLong
Anvil length (Exposure length)163 mm (6-3/8″)
Shank/DriveSquare Drive 25.4 mm (1″)
Max fastening torque3,150 N·m (2,323 ft.lbs.)
Max fastening torque (Other conditions)The value at 6 seconds after seating when tightening M36 friction grip bolt
Nut-busting torque4,000 N·m (2,950 ft.lbs.)
Impact power selection4 stages + 3 each step of F/R auto-stop function
Dimensions (L x W x H)570 x 135 x 276 mm (22-1/2 x 5-5/16 x 10-7/8″)
